BTG fender tfl S&D
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shorty fenders for BTG tire and S&D extended rails.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 63
- Wydruki
- 1
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
This Is a shorty fender designed to be used on BTG tire and steep and deep extended rail builds.
i also have a fender delete if thats more your jam here‘s the link for those:
https://www.printables.com/model/989723-btg-fender-delete-sd-extended-dubs
i printed this in nylonX 6 walls, 0.2 layer height (variable layer height setting would smooth out the portion that lays on the rails possibly) 4 tops and bottoms and 60% gyroid infill. you do need to enable support for the section that sits on top of footpad.
also this is designed around halo pads and 2mm ignite grip.
provided in step format so you can modify remix whatever easily to suit your needs.
Update after riding these quite a bit i noticed some rub at low psi and turning real hard so i adjusted the tolerances and added a chamfer inside