Cable Tidy Clip for Micro Swiss Direct Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After fitting my Ender-3 Pro with a Micro Swiss direct drive I found that the cables were floating around at the…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 81
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
After fitting my Ender-3 Pro with a Micro Swiss direct drive I found that the cables were floating around at the extruder end. I came up with the idea of printing a clip to attach to the extruder stepper motor that the conduit could be attached to and save wear and tear on the cables connected to it. After several designs I settled on this one which has ventilation holes.
The clip simply 'clips' over the stepper motor and you use 3mm tie-wraps / cable-ties to attach the conduit. Make sure there is enough length for the extruder to move to the extreme of the x-axis.
I printed this in ABS but I'm sure would be just as good in PLA
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.20
Infill:
30
Category: 3D Printer Parts