Cable Tidy Clip for Micro Swiss Direct Drive
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
After fitting my Ender-3 Pro with a Micro Swiss direct drive I found that the cables were floating around at the…
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 16
- Makes
- 0
- Views
- 81
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
After fitting my Ender-3 Pro with a Micro Swiss direct drive I found that the cables were floating around at the extruder end. I came up with the idea of printing a clip to attach to the extruder stepper motor that the conduit could be attached to and save wear and tear on the cables connected to it. After several designs I settled on this one which has ventilation holes.
The clip simply 'clips' over the stepper motor and you use 3mm tie-wraps / cable-ties to attach the conduit. Make sure there is enough length for the extruder to move to the extreme of the x-axis.
I printed this in ABS but I'm sure would be just as good in PLA
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
No
Supports:
No
0.20
Infill:
30
Category: 3D Printer Parts