Wera Bit Check Holder for ToughBuilt Technician 7-Pocket Pouch - Large
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Wera Bit Check Attachment for my ToughBuilt tool pouch.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted to attach my Wera Bit Check to my Toughbuilt Technician Pouch. So I made a holder that attaches to the side.
I don't know if all 6 heatseat inserts are needed, but I havent had any issue with the one I made even after a year.
Installing:
I used the drill jig as a guide for aligning, marking and punching/drilling the holes in the Toughbuilt Pouch.
I attached them using low profile ¼" FHCS and heat inserts.
I had to cut down and modify a 5/32" allen key to be able to tighten the bolts.
Parts:
- (6) 1/4"-20 x .3" Long Heat Set Inserts
- I used these from Amazon
- (6) 1/4"-20 x 3/8" long FHCS
- I used these from McMaster Car
Print Settings:
Material - I used PLA. (It has lasted for over a year)