Wera Bit Check Holder for ToughBuilt Technician 7-Pocket Pouch - Large
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Wera Bit Check Attachment for my ToughBuilt tool pouch.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 37
- Makes
- 0
- Views
- 1,244
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I wanted to attach my Wera Bit Check to my Toughbuilt Technician Pouch. So I made a holder that attaches to the side.
I don't know if all 6 heatseat inserts are needed, but I havent had any issue with the one I made even after a year.
Installing:
I used the drill jig as a guide for aligning, marking and punching/drilling the holes in the Toughbuilt Pouch.
I attached them using low profile ¼" FHCS and heat inserts.
I had to cut down and modify a 5/32" allen key to be able to tighten the bolts.
Parts:
- (6) 1/4"-20 x .3" Long Heat Set Inserts
- I used these from Amazon
- (6) 1/4"-20 x 3/8" long FHCS
- I used these from McMaster Car
Print Settings:
Material - I used PLA. (It has lasted for over a year)
