Silica Dryer BambuLab Spool Insert v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Insert for a standard BambuLab Spool that can be filled with silica/desiccant beads to be dried in a fil
- Ocena
- 4 / 5
- Polubienia
- 67
- Pobrania
- 350
- Wydruki
- 4
- Wyświetlenia
- 1691
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Version 2 of an insert for a standard BambuLab Spool that can be filled with silica/desiccant beads to be dried in a filament dryer.
Includes a convenient snap-in funnel for easy filling and transfer of beads into other containers.
Fully enclosed so can be used with filament dryers like the Eibos Polyphemus that rotate the spool.
Drying time 6-8 hours on 70c for a full container (in Polyphemus dryer)
Improvements over v1:
- larger diameter so it can now hold ±550 grams (vs ±400 grams)
- 1 mm taller for tighter seal against spool cap to prevent spilling contents
- bottom indicator to easily identify the close bottom vs open top when opening your spool
- funnel now comes with a spout for pouring beads out and a funnel to easily fill it
No supports needed.
Please note, it is essential to use materials that can withstand higher temperatures, such as PETG, PolyCarbonate, or similar high-grade plastics. (not PLA!) Some ABS/ASA brands may shrink causing tolerance issues if you don't calibrate slicer compensation for this.