Tapo S200B Doorbell Enclosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Enclosure to allow using a Tapo S200B as a doorbell.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 315
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
An enclosure for a Tapo S200B to use it as a doorbell.
Should give some degree of protection against the elements and hide the button to help prevent theft.
Base uses a reverse thread, there are two versions: one with holes to allow use of screws to mount or one without to mount with double sided tape.
There is a recess in the base to fit the metal mounting plate that comes with the S200B.
Add double sided tape to base of doorbell button to attach to face of S200B.
I printed at 0.12mm layer height on a Bambu Lab X1 with good results.
If thread is too tight can slightly increase scale of cover.
If using outside consider using a filament with UV resistance.