Flir One Pro microUSB to USB-C conversion or repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
There are no replacement parts for the connector of the FLIR one pro. My microUSB plug broke and i needed a replacement
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 607
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Ther are multiple ways of reviving the flir one pro after a problem with the connector. I stumbled over an article on hackaday that gave me the inspiration to repair/upgrade my FLIR one pro microUSB. Instead of an connection with the USB-C-Port of the camera, I opted to use a new plug.
I fund some USB-C-OTG-Host plugs on amazon. Soldered them to the test-points on the FLIR board and was happy with the results. My thermal camera was finally in working condition.
The printed part can hold the USB-C module, and is a direct replacement for the original plastic part.
Printing: 0.2 mm nozzle or resin printer is recommended.
Soldering: take a look into the photos of the Hackaday article and some YouTube videos about the repair.