Liczymy pasujące modele…
This is a quick remix of Josue's Flirc mount . I added 4 screw holders and removed the inner block to have my Pi fit into the case. I did have some print artefacts at the height of the screw mounts, yet my Pi fits fine and they are hidden…
The original Flirc case bottom plate gets sticky and degrades after a while. This is a printable replacement part. I filled the magnet holes that the original design had so it's just a plain bottom plate. Comes in variants with/without…
This is a bottom plate for the Flirc Raspbery Pi case to attach a Raspberry Pi to an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure, wobble-free installation. Read more about the Skadis T-Nuts Mounting System and check out the…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Here's my gift to Polish night airsoft community - a simple mount that allows you to use old flir scout tk thermal camera as thermal scope. It has a lens protector mount included. it's all based on M4 and M3 screws , there is simple way…
This enclosure pairs a Raspberry Pi 4, housed in an aluminum Flirc case, with a 2.5” SSD. For more information on the Flirc case, please see: https://flirc.tv/more/raspberry-pi-4-case You can also find it on Amazon. The 2.5" SSD shown is…
Made this case to mount my Flirc Raspberry Pi 4 case to the wall. Of note, this does not replace the bottom of the Flirc case, rather the print is simply placed beneath it. To do this, just unscrewed the existing four screws from the…
Recommend printing case insert at 5-7% infill with low durometer TPU for best shock absorption.
I really love the Flirc case for the Raspberry Pi, so I designed this mount to attach it onto my Prusa i3 Mk3. To screw the case together I used two 4-40 x 1/4" socket cap head screws. To attach the mount to the printer I used two of the…
Stackable case for extra HATs to be added on top of FLIRC's Raspberry Pi Zero case. I've included three case models plus USB-brigde-cover (for Waveshare's Ethernet / USB HUB HAT): * TEMPLATE - this is a basic piSlice case template to be…
Español: Por aquí les dejo la carcasa para la cámara de alta calidad de la Raspberry Pi. La diseñe para que trabaje con la carcasa flirc. Pueden ver el video de YouTube donde la diseñe en SolidWorks y Fusion 360 para hacer una leve…
This is holder/stand I designed for our FLIR K33 camera and is bolted in our firetruck. It also has pockets for two batteries. Printed in plastika trček PETG
This is a back plate for the Flirc Raspberry Pi Case to mount it to a Prusa i3 frame . It works with the Raspberry Pi 3B, 4, and 5 versions of the case. There are different versions of the back plate depending on the case variant. Note…
I got myself the FLIR CX-3 and wanted a proper way to store it, so I designed this case Wich fits it perfectly, I also attached the dxf files for cutting the Felt Parts. I used some Flexible bands I had laying around to make a holder for…
Mount your FLIR EX Series camera to a tripod! Requires: x2 4-40 nuts x2 4-40 Screws x1 ¼"-20 Nut CA Glue (optional, for ¼-20 nut)
Magnetic mount for Raspberry Pi-4 in Flirc case. My workbench was getting a bit cluttered, so created this to mount my raspberry pi's underneath. Requires 4 8mmx3mm ceramic magnets.
Buy the full version on Cults3D! Visit my store for paid models! https://cults3d.com/@1xmerch
Replacement Flirc Raspberry Pi 4 bottom cover for mounting directly to Ikea Skadis boards.
Adapt the Flir E4/E5 camera to use a ~$20 USD ZnSe lens from eBay to enable close up thermal imaging. I prefer the 100 mm focal length working distance. The model is designed for a 20 mm diameter, 2.5 mm thick lens. Print in PLA with 0.20…
I wanted a test lead holder for my FLIR DM166. There is one (TA84) that comes with the DM285 and used to be sold independently but FLIR no longer offers it. I recommend PLA over PETG as there is too much flex with PETG.
Ther are multiple ways of reviving the flir one pro after a problem with the connector. I stumbled over an article on hackaday that gave me the inspiration to repair/upgrade my FLIR one pro microUSB. Instead of an connection with the…
If the plastic screen cover on your FLIR Ex series thermal camera becomes damaged or scratched, this is a DIY option for creating a replacement yourself! Repair Difficulty: Moderate This repair requires a number of steps, but with care…
This stand/case keeps your controller nearby the pi zero for storage and charging. This is a remix from the below sources: https://www.thingiverse.com/thing:5156759 https://www.thingiverse.com/thing:3964539
Adapter zur Montage einer Flir BlackFly Kamera in einer 40 mm Optikbank. Die Aufnahmen an der Seite sind für M3 Einpressmuttern.
I bought a broken Flir One Pro in mind to repair the issue it had. Unfortunately i was not able to do so. I'll took the Lepton 3.5 Image-Sensor which stitheas quite a value.choose I was looking for a PureThermal 1/2/mini but as it has…
UPDATED FOR 2024 - Now with rounded corners - Imported from my Thingiverse. Simple holder for Raspberry Pi Zero 2 W - can be glued to the 3D printer og to a wall for simple organizing.
This "Piggy back" mount allows you to attach a Pi Zero w2 enclosed in a Flirc aluminium case directly on to your Prusa mk3s+ Einsy cover. The Pi is connected to the Einsy board with 4 wires (+5, 0, Tx, Rx). The mount attaches to the Stock…
This thing adapts an old school FLIR-ONE thermal camera which uses micro-USB to a present day phone having USB-C. You will need this USB-C breakout board:…
This package contains three designs (including all .stl, PRUSA Slicer, PRUSA MK3S g-code, and Fusion 360 source files) to mount a Raspberry Pi Zero in a Flirc case to a wall or backboard. These designs are for: Mounting on a pedestal…
Holder for thermal imaging camera Flir K2 Halterung für Wärmebildkamera Flir K2
A new backplate for the Flirc case for the Raspberry PI zero. This screws into the case instead of the factory backplate and has space to attach the case to the frame using T-nuts. This was made for the extrusions used on the Ender 3 but…
This is Tripod Mount Adapter for the Flir Ex and Exx series. It straps to the handle with a piece of double sided velcro. This fits: E4 / E5 / E6 / E8 E53 / E75 / E85 / E95 E54 / E76 / E86 / E96 Step files attached.
This holder was designed to keep my Raspberry PI 4 boards stacked firmly together while using the FLIRC case . All rear ports are accessible. However, top ports are covered except the USB-C. The reason is that I use my RPi boards in…
This protects the props for a Teledyne Siras UAV when putting in the case or other storage means. Two models for printing if your printer requires a brim. Just cut the integrated brim away after printing. These print pre-tensioned and…
The Raspberry pi 4 runs hot. So hot, in fact, that it heat soaked my FLIRC case in the time it took to watch half a movie in Kodi. I dug around in my spare parts bin and found a 40mm X 40mm X 10mm heat sink and a 12v 40mm Noctua fan. I…
This is a model I designed for a friend who was using a FLIR Vue Pro IR infrared camera to film hummingbirds for biological research projects. The camera itself is more designed with airborne applications in mind, so the camera is pre-set…
Raspberry Pi Stack for FLIRC case, with cheap USB 3.0 Hub and two HDD disk with external case. I've used cheap Chinese cases for HDD from Alibaba. FLIRC case is for better cooling of Raspi, Caution: If you plan on using the same usb hub…
Just added a dovetail to make it easily wall mountable. Probably best to print upright with supports. Dovetail is the same size as the original wall mount. Category: Computer
The material used is PETG, except for the cover piece, which is printed with natural PLA to better visualize the pilot lights. The material used is PETG, except for the TAPA piece, which is printed with natural PLA to better visualize the…
I wanted to print the cooler but i didn't have the right size fan to fit so i remodeled the fan case to fit a 35mm and it was short enough to fir in the case with good airflow.
I borrowed a FLIR camera from my son and he brought it to me wrapped in a rag. I decided to make him this solid protective case for it, as a “thank you“ for the loan. I briefly considered modelling a TPU insert to cradle the camera in the…
I modified the case to include an insert for the FLIR One Pro - IOS. I printed the case in PLA and the insert in TPU.
About This model is a small bracket which can be used to mount a Raspberry Pi Zero enclosed in a Flirc Case onto a tripod for camera projects. The bracket features a standard ¼ inch screw hole, which is the de-facto standard among…
I bought a broken Flir One Pro in mind to repair the issue it had. Unfortunately i was not able to do so. I'll took the Lepton 3.5 Image-Sensor which stitheas quite a value.choose I was looking for a PureThermal 1/2/mini but as it has…
This is a lens cap for the Flir Exx series handheld thermal imaging camera This cap should fit: E53 / E75 / E85 / E95 E54 / E76 / E86 / E96 Step files attached.
If you lost original case or wanted a more rugged one - Flir One Thermal Camera Case is for you . Works for all USB port versions. Printing Notes Print in PETG/PCTG for best results 3/4 walls and 20+% infill for best durability prints…
Custom Modular Lens Holder for FLIR IR Cameras Overview This project is a high-precision, complete replacement for the original FLIR focusing module. Designed to bridge the gap between consumer thermal imaging and professional…
These are the official CC BY-NC-SA 4.0 open-source STLs for the AeroTherm autonomous radiometric thermal UAV project by NasonNation Robotics. Mounting standard aerospace compute hardware to an FPV frame requires rigorous vibration…
Recommended Print Material: PETG Print settings: 100% infill. This is a small print. Clips on the back side of a FLIR TAU2 lens holder to protect the inside from dust while in storage.
This is a USB Cable Brace for the Flir Exx series handheld thermal imaging camera. Just like the Flie E series, there is a bit too much pressure applied to USBc cables when plugged in, so this reduces the pressure put on cables while the…
recommend using supports. ring-mount and IMU mount needs 2 m3 head inserts each.
This is holder/stand I designed for our FLIR K33 camera and is bolted in our firetruck. It also has pockets for two batteries. Printed in plastika trček PETG
Recommended Print Material: PETG Print settings: 100% infill. This is a small print. Clips on the back side of a FLIR TAU2 lens holder to protect the inside from dust while in storage.
Custom Modular Lens Holder for FLIR IR Cameras Overview This project is a high-precision, complete replacement for the original FLIR focusing module. Designed to bridge the gap between consumer thermal imaging and professional…
The original case cover and base may become sticky or develop cracks after years of use. These parts are designed as replacements. Differences from the original design: The top cover snap hooks have been reinforced to improve durability…
Two parts top and bottom for easy printing. Needs threading inserts.
This is a Tripod Mount for the Flir Exx(bx) camera series. There have been complaints that the original tripod adapter accessory was both very expensive ($50) and yet not very stable. Therefore created a cheap and stable version that…
This simple mod allows you to attach a Flirc Pi Zero case to any 2020-based extrusion (2040, 20-4040, etc) I used mine to attach it to an Ender 3. Print settings don't matter, but DO NOT USE ABRASIVE FILAMENTS! That means NO CF, GF, or…
Just a quick battery holder printed in TPU. It's never a good idea to leave batteries in devices you don't use often. This battery case holder is designed to stay with the tool and keep the batteries in a handy place.
Replacement lens cap for FLIR A700/A500/A300 fixed mount thermal camera with 17 mm (24°) lens.
I used PETG, but should to with PLA as well.
Case mount for the Flirc Raspberry Pi 4 Case. No supports needed.
I couldn’t find any suitable replacement, and several people at my workplace have been complaining about losing the caps for the FLIR MR-13. They asked me to design a simple, rubber-like cap that stays securely in place and protects the…
FLIR for helicopter I am designing, subject to change. The scale of the files is tiny, so if using for animation, scale up to liking. f3d files included.
RPI Holder with flirc case for Ender 3 v3 SE. this is use with and adapter
Holds a 20mm ZnSe, GaAs, or Germanium lens on a FLIR device to allow close focusing (macro mode). 50mm FL works well. Print instructions Category: Camera Instructions No support material required but a touching skirt or brim is…
This prints a replacement top for the Flirc Raspberry Pi case. The measurements are pretty much dead-on from an original plastic top, and it snaps in perfectly. I did make the tabs slightly thicker to make them stronger. This shouldn't…
This is to replace the Flirc top section of their case, I've added a raspberry pi logo as well as generally changing the shape of the design a little. You may find it a little loose, compared with the original I remixed it from, but this…
The original case cover and base may become sticky or develop cracks after years of use. These parts are designed as replacements. Differences from the original design: The top cover snap hooks have been reinforced to improve durability…
Two parts top and bottom for easy printing. Needs threading inserts.
Customizer is having some issues so I thought that I would just publish some ready to print hearts. Category: Decor
I wanted to mount my Flirc Raspberry Pi 4B Case to the wall so i decided to create a custom mounting model for this case, could be usable on other cases but i have not tested that. Case in question:…
I created this FLIRC Raspberry Pi 3B+ case caddy from scratch in Fusion 360 to secure my Raspberry Pi 3B+ in an aluminum FLIRC case running Octopi to my Ender 5 Pro using the rail under the Ender 5 control panel using two M5x8mm allen…
A mount to have my FLIR Breach attached to a GoPro mount. I might change the geometri and placement of the GoPro rings. And combine it with a powerbankholder to feed it power, it eats CR123 cells like crazy! Print Settings Printer Brand:…
Print at 0.2mm layer height. No supports required. In addition to the print, you will need: 18650 non-protected lithium battery (not the longer ones with the chip in them) Keystone 228 battery contact Keystone 209 battery contact 4mm X…
Bracket for mounting Raspberry pi Flirc case to 3030 profile use 2 M3/M4/M5 x10 screws and 2 M3/M4/M5 nuts to mount it to profile (choose screws per your liking) you can also use my drop in T nut:…
I have a Pi 3B+ and got a gen2 FLIRC case for it a while back as I loved the passive cooling (at least the idea of it). I've been hemming and hawing about whether to mountn it to the frame or not (whether the weight up top makes a…
Remixed this awesome box from themacboy to hold my flir thermal scope. This model is resized to 300% of the original and I added a plate with logo to attach to lid. UPDATE : Remixed a second version slightly larger than the original as…
Clampholder FLIR ONE Pro with powerbank for Tablet Samsung SMT865 in chinese rugged case. This is a remix of https://www.thingiverse.com/thing:5255772 (Author: James Haynes - thanks!). It should be rather easy to adjust size to fit other…
Thank you Micro SD Mantis4g63. Modified for 2 25X25mm fans and added a tray to hold the Micro SD to Micro SD Extension. These smaller fans allowed me to mount them inside the enclosure and the Micro SD to Micro SD Extension tray is just…
This was my idea to have an external cooling option for the FLIRC case. The power supply can be fed through the opening on the side where the camera cable exits. The design is in two halves so that no supports are required and the halves…
This is a lens holder for the FLIR Ex cameras, it holds a 20mm lens snugly and fits snugly into the camera. I made this because the other one available is quite bulky and a little temperamental to get the angle to print clean. This one…
The direct replacement batteries all suck! But the ones I use at work are great. I'll design a battpack and solve it myself. My lipo is 50mm x 22mm x 6mm. These ones on amazon are about the same size and should work. I cannot attest to…
This is a replacement battery hatch for the FLIR BCAM. Things needed: Print both STLs here (I recommend ABS, ASA, or PETG) 1x m3x30 bolt 4x 6x2mm neodymium magnets I've also included the STEP file for anyone who wants to edit this model.
25mm diameter lens adapter for FLIR Exx (E30-E60) IR cameras. Results in a 2x magnification with a 125mm focal length lens. ZnSe/GaAs lenses can usually be obtained from Ebay for $30-60. Recommended print settings: Perimeter lines: 3…
I created from sratch a clip to hold the RPi 4 FLIRC case with the clip from https://www.printables.com/model/677437-en You need to print both to use this clip. The RPi holder goes all the way down to rest for stability against the side…
I have remixed the case lid and put some ventilation holes in it. I hope so the heat escapes better this way. If it doesn't helps I will make another remix to mount a fan on the lid.
This is a USB-C / Power Delivery charger for the Flir EXX E-Series thermal cameras (E30, E30bx, E40, E40bx, E50, E50bx) and maybe E33/E63 meant to replace a missing T910814 charger. Should work with T198487, T199363, T199363ACC 3.6V 5.2Ah…
Mount replaces the bottom cover of the Flirc case. Attaches to the Prusa Enclosure with two M3x12 screws
Modified top and bottom covers for the Flirc Raspberry Pi 4 Case, with camera mounting holes for camera module v2. You will need to cut a small slit in the top of the case to use the top cover. Both models print easily laying flat. Bottom…
For those who want a fanless and optimal cooling setup for their Pi and 3D printer! I've been using a Flirc case for my RPi 3B+ and Ender 3 ever since I got my printer more than a year ago. So far, I've ran Octoprint on it with a bunch of…
Changed out the battery and plan to disconnect between uses. Wanted a cover that had some grip but could be removed when needed. This feels great so far. Printed in petg. .28 layer with the hooks at .12. Doesn't hold hard but does snap in…
