FLIR Exx Exxbx Tripod Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tripod mount adapter for the FLIR Exx and Exxbx series thermal imagers. More stable than FLIR original.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 426
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a Tripod Mount for the Flir Exx(bx) camera series.
There have been complaints that the original tripod adapter accessory was both very expensive ($50) and yet not very stable.
Therefore created a cheap and stable version that anyone can 3D print, that fit multiple tripods, including the very common Manfrotto 200PL-14 mount plate.
The adapter has a thumbscrew wheel to secure it to the thermal imager, as well as a Velcro-strap to further stabilize it to the handle of the imager.
It uses 2pcs 3/8 -> 1/4 UNC adapters to be able to provide a metal thread for the tripods screw.
The Thumbwheel has to be threaded with a M5 thread.
[REQUIRED HARDWARE]
1 pcs M5x14 hex socket screw (insex)
2 pcs Female 1/4 to Male 3/8 Convert Screw Adapter
1 pcs Velcro Strap
Optionally, can place 1mm soft one-sided foam tape at the top surface and handle surface to further minimize risk of wear.
[DONATIONS]
If you find that this item improve your daily life, consider supporting the creator with a donation.