FLIR Exx Exxbx Tripod Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a tripod mount adapter for the FLIR Exx and Exxbx series thermal imagers. More stable than FLIR original.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 51
- Makes
- 0
- Views
- 426
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a Tripod Mount for the Flir Exx(bx) camera series.
There have been complaints that the original tripod adapter accessory was both very expensive ($50) and yet not very stable.
Therefore created a cheap and stable version that anyone can 3D print, that fit multiple tripods, including the very common Manfrotto 200PL-14 mount plate.
The adapter has a thumbscrew wheel to secure it to the thermal imager, as well as a Velcro-strap to further stabilize it to the handle of the imager.
It uses 2pcs 3/8 -> 1/4 UNC adapters to be able to provide a metal thread for the tripods screw.
The Thumbwheel has to be threaded with a M5 thread.
[REQUIRED HARDWARE]
1 pcs M5x14 hex socket screw (insex)
2 pcs Female 1/4 to Male 3/8 Convert Screw Adapter
1 pcs Velcro Strap
Optionally, can place 1mm soft one-sided foam tape at the top surface and handle surface to further minimize risk of wear.
[DONATIONS]
If you find that this item improve your daily life, consider supporting the creator with a donation.