Liczymy pasujące modele…
After seeing many other container projects, and old products like the Dutch Roly Kit, I thought I'd try my hand at designing my own. I spent weeks worth of manhours working on prototypes and iterations, so please, if you really like it,…
Instead of using a 8mm rod & bearings in the X-ends, the X-ends have been changed to make use of a single LMUW10 (and thus 10mm rods). No loss of print volume, no custom firmware, it's all fully compatible parts. Oh. And it's usually…
CZ verze 10 × 15 cm , verze 15 × 21 cm Tato velikost fotorámečku je určena pro fotografie o velikosti 13 × 18 cm. Podle orientace připevnění rámečku na stěnu, budou všechny fotografie orientovány buďto vertikálně, nebo horizontálně (ne…
I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Mini extruder (link to github below). Prints have been…
Could not find a holder for my tool to keep my shop organized so decided to design one. t does not need any support
These covers can be used to make the beige Noctua-AF12x25 fans blend better into a custom pc build. There are versions for a single fan a full cover for radiators using 120 mm fans - the design is modular a front cover for radiators using…
Remix of two wonderful designs to allow for you to fully rigid mount a TriangleLab or Phaetus Dragon SF/HF and also use the Delta P V2-R2 fan duct on the BearEXXA. Any and all feedback is welcome! NOTE: You will need 4 M2.5x5 or 6mm SHCS…
This honeycomb front panel gives your PC-case higher airflow than the standard glass-panel.
Bear EXXA motor cover This is a motor cover for the X axis of the Bear EXXA upgrade. The 'PRUSA' logo can be highlighted by printing the insert part with a different color. !! PRINT IN PETG. The heat generated from the X axis motor will…
Disclaimer: it's a really minor modification, but this is untested . I haven't put this to use myself (I went straight to a 10mm Z-axis in my upgrade/mod-endeavors). Instead of using two LM8UU bearings in the X-ends, the X-ends have been…
Domino holder with hex pattern. Fits 7 standing up.
Chest buckle designed for Thule Yepp Nexxt child bike seat
I also added blank "slot cover" for helmet and standalone holder for V6 intercom for possible easy remixes for another helmet or intercom (or anything else :). Designed by hand measuring as precise as possible and tested on Nexx Vilitur…
This is an add-on part for my Voron-inspired PC case project: Corvus PC - Voron Inspired PC Case It is designed only for the Alphacool NexXxos ST30 360mm radiator and I cannot guarantee compatibility with other radiator models or…
Schneider Exxact Dimmer Knob
Model of the Moth shuttle from the Lexx TV series, scale approximately 1:35, for assembly you will need glue and a small adjustment of the parts is also required, the wings and cockpit canopy can be printed from transparent plastic, but I…
I was always kind of upset with how heavy the stock MK3S+ and Bear toolheads were, so I decided to modify a friend's Orbiter mount to work with the amazing Annex Engineering Sherpa Micro extruder (link to github/BOM below). The stock Bear…
For some reason, I had issues getting the "Flat Bottom" print files to work, so I took the STLs in cad and patched up the panels that are dished for the texture. My Voron simply refused to play well with the overhangs. I've only uploaded…
I was not content with other extruder designs for Slice Engineering Mosquito hotend so I designed my own. Introducing the BearExxa Mosquito based off of the Bear Extruder created by Grégoire Saunier . Big thanks to both Grégoire Saunier…
This has been made for use with common 20T 5mm-bore idlers with the following dimensions: 5mm bore 18mm flange 9mm width (6mm belt) Changes made to the original the parts: Upsized the bore to 5.04mm, same as the E3D-idler design (from…
This remix of Gregsaun's BearExxa (Bear extruder and X axis) repositions the extruder to match the vertical position of the stock MK3S extruder. This allows for stock firmware to be used without flashing any calibration firmware. The…
I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another…
GPU Holder for DeepCool Matrexx 50 PC case. Rafts: No Supports: No Resolution: 0.2 Infill: 20% Parts: 2x M3 bolts
Consists of 3 parts but doesn't require any tools. To place it - Grab a panel piece by the sides, line up the long clippers with the holes in the case chassis and then push until it clicks. Then push every side until it sits properly. To…
This is a remix of the Bear Exxa extruder cover that adds a small peg that prevents the Dragon hotend from turning. This is achieved by a the addition of a small peg that locks down into the structure of the dragon hotend and holds it…
Adapter for Nexx X-Com 2 Intercom Slot (Helmet) to Standard SENA Intercom This adapter allows you to mount a standard SENA intercom to the dedicated Nexx X-Com 2 slot on your helmet. Designed for a secure fit using 2x M3 screws and 2x…
Here are two parts that you can print, I only use the "front" part because the 3 button frame I use is attached to the switches. If you choose to only have the Aqara mini switch with Exxact 1 ram, also print out the "back" part which you…
- Added some space for cheap couplers (Motor Mounts) - Added some Bearing to Top mount - Reduced Guiding in Slot Added remixes guide for Rod from https://www.thingiverse.com/thing:3282965
Snaps into the empty frame of an Schneider exxact. Print Settings Printer Brand: Prusa Printer: I3 MK3S Supports: Yes Resolution: 0.2 mm Infill: any Category: Household Supplies
Oops Well, I was browsing the repo after I published this and saw there was already an official reverse bowden setup up there. https://github.com/gregsaun/bear_extruder_and_x_axis/tree/master/optional_parts/reverse_bowden I'm leaving mine…
Revo Six needs ptfe tube trimming. This tools is used to trip it. Print parameters are the ones used for original tool
I built a PC using the Deepcool Matrexx 50 case with RGB fans ( https://www.canadacomputers.com/product_info.php?cPath=6_1937&item_id=139452 ) , and noticed there was a large open space on the top of the fan bank on the front. Did not…
Slide this cover over the Schneider Exxact housing (with the button removed). This enables easy access to toggling power if needed. Printed without supports.
Modified the Bear Upgrade 2.1 Extruder (BearExxa) Cover (fs-cover) to fit the original M5 fitting used by Prusa for the MMU2 cover. I bought the fittings here: http://lecktor.com/en/nuts/159-tappex-microbarb-m5-pack-of-10.html Print…
This is a Tripod Mount for the Flir Exx(bx) camera series. There have been complaints that the original tripod adapter accessory was both very expensive ($50) and yet not very stable. Therefore created a cheap and stable version that…
Lovec Divočiny je detailní fan‑art miniatura inspirovaná legendárním půl‑orkím bojovníkem a pánem bestií. Postava stojí v pevné, bojové póze, oděná v těžké zbroji a vybavená masivními zbraněmi. Drsný vzhled, výrazné textury a robustní…
This re-adds the collet from the Dragon hot end back to the mounting hardware. This should help keep the PTFE tube nice and flush against the top the hot end and prevent it from pulling out when removing filament. The collet isn't too…
Made this for a coworker so he could mount his Thule Yepp Nexxt 2 Mini seat on his Scott Genius Eride 930. The bike have a wider handle bar which made the original mount too small. Printed in ASA for durability. On my bambu there was no…
Bear Extruder Motor and Idler part for Chinese TR8 Anti Backlash. Model is for MK3s 1st Version to test. Category: 3D Printer Parts
A wall mount for the Philips Hue Dimmer Switch (v2) to use with Schneider Electric “Exxact” light switches. This mount requieres no drilling, taping or any modification to the wall. I created this since I was not sure if I will like the…
I made two variants because I didn't like how the straight variant looks on helmet so I made also an angled variant. With small nipple as a counterpart on intercom for satisfying click and retention. There is also a pocket for USB cable…
1:1 Ratio of the Alphacool NeXxos ST30 240mm Radiator.
Snaps into the empty frame of an Schneider exxact. Category: Household Supplies
Wanted an Exxon sign for the garage and couldn't find one already made. Printed at 0.2mm layer height, color swap from white to red at layer 6 / 1.20mm, then color swap to blue at layer 9 / 1.80mm.
As the F-Exx 8.0C car fire extinguisher does not come with a mount or fixture i decided to design one to fix the extinguisher somewhere in the car. This is done via a velcro, which is super glued to the bottom of the holder. In addition,…
na nádobce se mi ulomil zobáček který drží zacvaknutou nádobku na odpad, sundal jsem originalni stitek bosch a nahradil ho stítkem který má na sobě zobáček takže nádoba nyní opět drží nádobka na prach se dá koupit celá pod číslem bosch…
It should also work for Thule RideAlong, but I have not tested it. Center distance between metal bars is 89 mm. I made two versions, a screw and a bolted version. Screw version: Made for a Ø4 mm countersunk screw with a head diameter of…
This is a riser frame for Schneider Electric Exxact 4-way socket-outlet. Part: WDE002488 Frame is 12mm thick, hole is 10mm. Print instructions I printed this in white PETG. Unfortunately the white shade was not correct.
For mounting IKEA TRÅDFRI On/Off button in Schneider Exxact frame on top of a existing lamp button. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0.3 Infill: 25% Filament: Clas Ohlson PLA White…
Specifically for use in the DeepCool Matrexx 50. Use two case screws to attach the bracket through the SSD drive holes location as shown in the pictures. Its a good case for the money, but the screw holes strip out easily, and the back…
I lost the plastic brackets of one of the SlimFit Adapters to fit on thinner frames. So i remolded it. Enjoy! You have to use supports. Tree supports worked quite good.
This is Tripod Mount Adapter for the Flir Ex and Exx series. It straps to the handle with a piece of double sided velcro. This fits: E4 / E5 / E6 / E8 E53 / E75 / E85 / E95 E54 / E76 / E86 / E96 Step files attached.
This Extruder Cover uses the cavity at the base of the Revo 6 to prevent the hotend from spinning, and also prevents heat from the heater core from escaping into the cooling area. For bearexxa V1, and also a version for the delta p bear…
Just a simple base for a mini TorchBlueXXL to keep it upright and findable on my messy light table. Print Settings Printer Brand: Creality Printer: Ender 5 Supports: No Resolution: .2 Filament: Any PLA Category: Tool Holders & Boxes
While using the original model for a few hours of printing, I noticed that the PTFE tube slowly moves upwards because of the retractions and inevitably gets caught by the extruder wheels. The tube is afterwards damaged in such a way that…
Pictures tell the story - use this to nicely integrate Philips Hue Dimmer Switch to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original Schneider Exxact components: Button, part that…
Pictures tell the story - use this to nicely integrate Philips Hue Smart button to an existing Schneider Exxact light switch without permanent modifications. Installation Remove the original button from the light switch by pulling. Use…
věšáček do technické místnosti na vysavač bosch flexxo. nejdříve namontujete závěs a po zavěšení vysavače si najdete vhodné místo pro montáž držáčku kabelu takže už nebudete muset ručně připojovat kabel, jen zavěsíte vysavač a kabel se…
Have you also fallen in love with the plushies in Fortnite Chapter 7 Season 1. I am infatuated with these guys right now and had to recreate them! Here the Dino inspired plushie ◡ Supports are recommended! None of my files are ready for…
Update May 3, 2022: I recently tried printing an object that completely filled the print bed of my bear Prusa and discovered that this endo mount hits the power supply at the extreme X axis position. It's fine for prints that don't go…
Exxon logo for office \ workshop
You will need an additional 625RS or 625ZZ bearing. It is not possible at the moment to add mor things to the remix sources, so i have to link them here manually. This thing is a remix or inspired by the following things:…
This 3D printable filament spool (plan version) is specially designed for use with FLEXX3D filament refills. It allows users to print their own durable and reusable spool, making it easy to use refill packs and reduce overall filament…
an upload of my Thingiverse upload thing:5920110 this is a combination of Bear Titan Extruder MK2.5S by TimeWalker75a ( https://www.thingiverse.com/thing:4533682 ) and Full Bear MK3 X/Z Lineal Rails MGN12 by DanielSan_84 (…
This adapter plate allows fixing the Bowers & Wilkins 705 S2 to the Atacama Nexxus Essential 600 by using 4 pcs M6 x 25 screws. Printed on Prusa Mk4, 0.2mm structural, Prusament PETG, 20% Gyroid infill
This version of the X carriage changes belt alignment to make it compatible with BearEXXA. It allows to use the original MK3S toolhead on a printer with BearEXXA X axis mounts
Drziak vysavača bosch flexxo serie 4. Keďže vysávač neustále padal, tak som vyrobil tento jednoduchý držiak.
A 10x10x3 mm idee token for the ttrpg HeXXen 1733
Changed the filament sensor cover so that an LED behind it shows the status of the sensor. The side walls of the recess are slightly bent to avoid pushing through. There are two versions of the window insert available. The smaller one fit…
Didn't want to cut the rods I was using so edited the Bear exxa STL
Remix for new on-off or up-down tradfri switch
Ensures no air is pulled (or pushed away; pull has almost negligible additional performance, apparently) from the ~1mm gap between the radiator and the fans when using Noctua's anti-vibration mounts. Also includes a further 4mm gap for…
I wanted to be able to use my cheapo v6 hotend for one hand nozzle swap, but the screw heads were colliding and the PTFE was not secured. Currently testing, use at your own discretion I bear no responsibility! Credits to Greg Saunier for…
This is a WIP, but a multi piece print to make a 90 degree air duct for a water cooling radiator solution for hot-environment printers. 350mm bed size minimum for printing. You probably shouldn't make this, because right now my response…
A mashup model to add a PC4-M10 ptfe to the bearexxa extruder
This is a remake of the peak extewnsor screw holder. I lost mine so I remade it. Print at 100% infill and put an m3x5.7x5.0 brass insert. The screw is am m3, 8mm long. Print it like the fusion 360 preview image. I printed at 0.2 in black…
This is a lens cap for the Flir Exx series handheld thermal imaging camera This cap should fit: E53 / E75 / E85 / E95 E54 / E76 / E86 / E96 Step files attached.
A travel box for a great card game Hexx from Foxgames ( http://foxgames.pl/hexx/ ). As often the original box is a bit bulky and not travel-friendly so I've designed a replacement optimized for size of cards. If you like my design do not…
My personal filament profile for Flexx3d PLA
A 10x10x3 mm ambition token for the ttrpg HeXXen 1733
DK version ( lower module in picture with double frame) Remove original frame (2pcs) from the wall switch, click module (button) into the frame and press into place. Use a bit of tape to secure, but should not be needed. (i can barely get…
I guess this could work for other smart buttons etc. Print with supports on build plate.
CZ: Tento univerzální držák slouží pro upevnění světel s klasickým upínacím mechanismem pomocí gumičky a také pro upevnění světel/radarů Garmin Varia nebo Bryton Gardia pomocí upevňovací základny (dostupná např. na Aliexpressu). Držák je…
Simple mod of BearExxa filament sensor cover to accept QSM-M5 fitting when printer is placed in an Original Prusa Enclosure.
Gridfinity 2x1x4 for two pmd flexx 3d lidar
Montáž A Umiestnenie Rozdeleného Modelu Model bol navrhnutý ako dvojdielny tisk (Diel 1 a Diel 2) z dôvodu presiahnutia maximálnych rozmerov tlačovej plochy. Pre dosiahnutie funkčnosti je nevyhnutná montáž oboch dielov. Postup Upevnenia:…
This is a simple mount for an ESP32 CAM (about 5 bucks) that hooks into the holes in the rear left corner of an ExxoTerra 30x30x30 terrarium. Precisely, it hooks into two of the holes and leaves one free for the power supply of the cam. I…
If you do not want to use any adhesives, maybe beef up the “legs” or add screw holes. Fusion file is also uploaded
The mount that comes with the block does not fit with the socket on the EP8KTA3 motherboard. This mount uses spacers and existing mounting points on the motherboard to secure the block to the CPU . A threaded insert secures the mounting…
This is a USB Cable Brace for the Flir Exx series handheld thermal imaging camera. Just like the Flie E series, there is a bit too much pressure applied to USBc cables when plugged in, so this reduces the pressure put on cables while the…
🟩 🟦 🟦 🟪 🟥 🟧 🟨 I am making a custom cooling system for my workstation so that I can get another GPU in it easily. To do this I have to utilise a 120mm fan mount on the case to cool an angry Ryzen. This radiator from Alphacool is perfect at…
I made this keeper because I use Zigbee lights and want the wall switches to stay on. It clips onto Schneider Exxact frames to prevent accidental switching. The low profile leaves most of the rocker visible, and it’s easily removable when…
Precision-fit GoPro mount designed specifically for the Nexx X.R3R helmet. The mount is attached using 3M VHB high-performance adhesive tape, providing a secure hold even at higher speeds. Printing in TPU is recommended to ensure optimal…
This 3D printable filament spool (plan version) is specially designed for use with FLEXX3D filament refills. It allows users to print their own durable and reusable spool, making it easy to use refill packs and reduce overall filament…
I printed the model in PETG with 20% grid infil
Trinexx. You can support me on https://www.patreon.com/Schlossbauer if you like my work. Category: Toys & Games
![X axis Motor Cover [Bear EXXA]](https://media.printables.com/media/prints/70246/images/765621_3c7cfd1c-9b3d-48b5-bf9e-9d76a0915528/x_end_motor_2021-jun-30_09-44-16am-000_customized.png)
