1 / 4
ESP32 CAM Mount for ExxoTerra 30x30 Terrarium — zdjęcie 1
1 / 4

ESP32 CAM Mount for ExxoTerra 30x30 Terrarium

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple mount for an ESP32 CAM that hooks in the rear left corner of an ExxoTerra 30x30x30 terrarium. Angle adjustable.

Ocena
0 / 5
Polubienia
4
Pobrania
6
Wydruki
0
Wyświetlenia
98
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Pets
Licencja
Creative Commons — Public Domain

This is a simple mount for an ESP32 CAM (about 5 bucks) that hooks into the holes in the rear left corner of an ExxoTerra 30x30x30 terrarium. Precisely, it hooks into two of the holes and leaves one free for the power supply of the cam.

I have used this ball mount: Open Source Universal Ball Joint (to reuse!) von DieZopfe | Kostenloses STL-Modell herunterladen | Printables.com

Glued the ball on the raised surface (the screw needs to be placed before glueing…).

The base gets glued on the back of the cam case of your choice.

You will need to remove the glue on the camera lens to adjust the focus. With the standard lens the ESP32 CAM is able to just about cover the whole bottom of the terrarium. However, with some soil there will be parts missing on the picture. In my setup I probably cover aber 80% of the soil surface. There are alternative lenses available for ESP32 cams.

The ESP32 CAM needs to be flashed and streams a flow of pictures in your local network, accessible with any computer, tablet, phone which is either directly connected to the wifi of the cam or to the same WiFi in your house.

Enjoy!

 

Tagi