ESP32 CAM Mount for ExxoTerra 30x30 Terrarium
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple mount for an ESP32 CAM that hooks in the rear left corner of an ExxoTerra 30x30x30 terrarium. Angle adjustable.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 7
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Public Domain
This is a simple mount for an ESP32 CAM (about 5 bucks) that hooks into the holes in the rear left corner of an ExxoTerra 30x30x30 terrarium. Precisely, it hooks into two of the holes and leaves one free for the power supply of the cam.
I have used this ball mount: Open Source Universal Ball Joint (to reuse!) von DieZopfe | Kostenloses STL-Modell herunterladen | Printables.com
Glued the ball on the raised surface (the screw needs to be placed before glueing…).
The base gets glued on the back of the cam case of your choice.
You will need to remove the glue on the camera lens to adjust the focus. With the standard lens the ESP32 CAM is able to just about cover the whole bottom of the terrarium. However, with some soil there will be parts missing on the picture. In my setup I probably cover aber 80% of the soil surface. There are alternative lenses available for ESP32 cams.
The ESP32 CAM needs to be flashed and streams a flow of pictures in your local network, accessible with any computer, tablet, phone which is either directly connected to the wifi of the cam or to the same WiFi in your house.
Enjoy!