Flir One Pro microUSB to USB-C conversion or repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
There are no replacement parts for the connector of the FLIR one pro. My microUSB plug broke and i needed a replacement
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 37
- Makes
- 0
- Views
- 607
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Ther are multiple ways of reviving the flir one pro after a problem with the connector. I stumbled over an article on hackaday that gave me the inspiration to repair/upgrade my FLIR one pro microUSB. Instead of an connection with the USB-C-Port of the camera, I opted to use a new plug.
I fund some USB-C-OTG-Host plugs on amazon. Soldered them to the test-points on the FLIR board and was happy with the results. My thermal camera was finally in working condition.
The printed part can hold the USB-C module, and is a direct replacement for the original plastic part.
Printing: 0.2 mm nozzle or resin printer is recommended.
Soldering: take a look into the photos of the Hackaday article and some YouTube videos about the repair.