1 / 2
Adapter Spacers for Mountain Bike Axle Mount 15x100 to 15x110
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Press fit 5mm adapter for each end of an old axle mount to use with 110mm axles.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 272
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The axle hole is sized at 15.4mm. That was just right with PETG-CF, but you may need hole compensation to match your filament and preference.
My old 15x100 axle mount had an OD of ~20.75mm, so this is sized to press fit over that dimension on each end. Let me know if you need another size!