1 / 6
Cooling jacket for the motor of a radio-controlled boat with a diameter of 28 mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cooling jacket for the motor of a radio-controlled boat with a diameter of 28 mm.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 152
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
Cooling jacket for the motor of a radio-controlled boat with a diameter of 28 mm.
The cooling channels are made in the form of a spiral, the inner diameter of the supply fittings is 3 mm. One fitting is made separately for the convenience of printing. Two rubber rings with a thickness of 3 mm are required for sealing. The inner diameter is 27 mm and the outer diameter is 33 mm
Support will be required for successful printing, I used tree-like in three places