1 / 6
Cooling jacket for the motor of a radio-controlled boat with a diameter of 28 mm
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cooling jacket for the motor of a radio-controlled boat with a diameter of 28 mm.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 152
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
Cooling jacket for the motor of a radio-controlled boat with a diameter of 28 mm.
The cooling channels are made in the form of a spiral, the inner diameter of the supply fittings is 3 mm. One fitting is made separately for the convenience of printing. Two rubber rings with a thickness of 3 mm are required for sealing. The inner diameter is 27 mm and the outer diameter is 33 mm
Support will be required for successful printing, I used tree-like in three places