Shop Vac to A/C Drain Line
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to connect a shop vacuum to an A/C drain line for quick and easy clog removal. Perfect for regular maintenance t
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This adapter connects a shop vac to an A/C drain line, simplifying clog removal and routine maintenance. Should fit any shop vacuum that has a 2.25" hose. It's an essential tool to prevent HVAC water damage. The ID for the hose end is 2.25" and the OD for the drain side is .8", both tapered to ensure a tight fit.
Build Instructions
Print the model with 4 wall thicknesses and 30% infill for durability. No supports are needed. Ensure accurate measurements of your drain line for a proper fit before printing.
Print Tips
Use PLA or PETG for best results. A smooth, clean print surface is recommended. No brim required. Adjust your print settings for good layer adhesion and finish quality.