1 / 2
AOS UL5 V5 Build Parts (Max-Height O3 Antenna + GPS) — zdjęcie 1
1 / 2

AOS UL5 V5 Build Parts (Max-Height O3 Antenna + GPS)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

All of my custom designs for this build

Ocena
0 / 5
Polubienia
1
Pobrania
17
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives
Max-Height Antenna and 18×18mm GPS Mount

This mount places the stock DJI antenna as high as it can go with the O3 Air Unit in the rear mounting position. It also provides a place to mount an 18x18mm GPS unit.

This print is configurable, so let me know if you'd like me to add a different GPS size, antenna height or angle (default is 25deg / 60mm).

Print Details
  • Material: SainSmart 95A TPU
  • Infill: Cubic
  • Supports: The GPS and antenna mount requires snug supports on the horizontal area near the bottom. None are required for the mast, and none are required for the toe guards and power gasket.

Tagi