IKEA MALM bed drawer stiffening fix kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket and small triangle piece to prevent the drawer front from tearing off.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution
The IKEA MALM is a bed with integrated drawers, whose front sadly has a tendency to break off, especially with heavily loaded drawers.
The first piece of this kit is an L-bracket designed to be mounted inside the drawer on both sides, joining the side wall and the front. To install it, drill a hole through the side wall, put an M5 nut in the bracket and fasten the bracket to the drawer by an M5 screw from the outside. Then screw in two wood screws into the drawer front. I recommend first using a sharp Phillips head screwdriver to make a center hole and then driving the screw in manually. Note that the front is hollow, so the screw needn't be long and mistakes are hard to fix.
The second piece is a triangle-shaped ramp, designed to glue onto the sides of the drawer from the outside. The goal is to prevent the small overhang of the drawer front from snagging on things when closing, which hammers it out from the rest of the drawer.
The photos are of a slightly older revision, since that's what I actually put on a drawer.