1 / 3
LED dimmer case (or potentiometer case)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A (LED dimmer) case to fit a potentiometer and a 2.1 mm barrel jack
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 143
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
This simple case consists of two parts:
- a top part featuring a 7mm hole on its top face to fit a potentiometer (this type) and another 12mm hole on its side to fit a 2.1mm barrel plug (this one). There is also two 1.5 mm holes on the other side to let cables out to be plugged on whatever you need to dim.
- a bottom part, to enclose all the electronics.
The two parts of the case are assembled using 2 M2 screws with their nuts. 5 mm long screws fit perfectly. I use this box as a dimmer for a LED strip (you can find the case I designed for this strip here). If your use case is similar, I would suggest buying a combined potentiometer/switch.
If this case does not fit exactly your need, feel free to change its dimensions using the provided step file, or by duplicating my original document in Onshape.