1 / 3
LED dimmer case (or potentiometer case)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A (LED dimmer) case to fit a potentiometer and a 2.1 mm barrel jack
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Share Alike
This simple case consists of two parts:
- a top part featuring a 7mm hole on its top face to fit a potentiometer (this type) and another 12mm hole on its side to fit a 2.1mm barrel plug (this one). There is also two 1.5 mm holes on the other side to let cables out to be plugged on whatever you need to dim.
- a bottom part, to enclose all the electronics.
The two parts of the case are assembled using 2 M2 screws with their nuts. 5 mm long screws fit perfectly. I use this box as a dimmer for a LED strip (you can find the case I designed for this strip here). If your use case is similar, I would suggest buying a combined potentiometer/switch.
If this case does not fit exactly your need, feel free to change its dimensions using the provided step file, or by duplicating my original document in Onshape.