1 / 3
DFRobot Romeo/V2/BLE to Romeo ESP32-S3 Standoff Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter for the DFRobot ESP32-S3 which mounts using holes meant for the DFRobot Romeo, Romeo V2, and/or Romeo BLE
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 140
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
I recently purchased a DFRobot Devastator Tank kit and a corresponding Romeo ESP32-S3. I didn't realize the mounting holes were different between the different Romeo variants, so I modeled an adapter to bridge between the two.
For this build, you will need 6 M3x5.7 threaded inserts. The holes are exactly 4mm across, so you should be able to drill them out a touch if they are too small.