1 / 5
Fan Shroud Micro Swiss NG compatible with the FanDuct of the Prusa MK4S — zdjęcie 1
1 / 5

Fan Shroud Micro Swiss NG compatible with the FanDuct of the Prusa MK4S

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Fan Shroud for a Micro Swiss NG Direct Drive Extruder compatible with the FanDuct of the Prusa MK4S model

Ocena
0 / 5
Polubienia
5
Pobrania
20
Wydruki
0
Wyświetlenia
348
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Fan Shroud for a Micro Swiss NG Direct Drive Extruder compatible with the FanDuct of the Prusa MK4S model

This project consists of 3 parts:

  1. The Fan Shroud itself that sits on top of the Extruder
  2. The adapter plates that connect to the Prusa parts
  3. A small cover to use a 5015 fan instead of the Prusa Blower Fan.

Important

Print the Prusa-Parts with 104% because else some 5015 Fans, like the Sunon ones, won't fit properly. The adapter plates included here are also made for the 104% scaling and need to be modified for the original size. But given their tolerance can be fitted by doing some sanding, too.

The main goal of this project was to use the Prusa parts without modifying the models in any way except scaling. This means you require the original parts called "fan-shroud-mk4s_r1", "fan-case-r2" and the optional "fan-case-cover_r1" you can find here:
https://www.printables.com/model/451500-mk4smk39s-printable-parts

I achieved great overhangs with this FanShroud that exceeded the quality I got from the original Fanshroud of MicroSwiss, while being able to reduce the weight of the printhead. Feel free to remix it! Especially the adapter plates have a lot of room for improvement.

Tagi