1 / 13
MFD Mini Crosswind Motor Mounts
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Didn't like the wood motor mounts that came with the kit. Made some with heat inserts so I can use loctite on the screws
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Share Alike
You'll need 8 - m3X4.5X3 heat set inserts. I used some i had out of this assortment. But these will work as well m3X5X3
Print with a high temp material. I used ASA for mine. Its probably overkill but I printed mine with 100% infill.
The heat inserts go on the back side of the motor mount. There is a small lip that the heat inserts butt up against and in theory will help hold them in the mount. You can see what I'm talking about in the last 2 picture.