P
PrintablesBanditFPVprints
Ultra Aero MFD Crosswind Nose Pan and Tilt
https://drive.google.com/file/d/1LJF4q0jT6vhwwhPXuVPZRVJ69Xs1wBri/view?usp=sharing
- Pobrania
- 86
- Polubienia
- 13
- Ocena
- 0
Wyniki wyszukiwania: crosswind
Liczymy pasujące modele…
P
Printablesphrogpilot73
Remixed MFG Crosswind Extended Wall Standoffs
The original extended wall spacers perfectly fit my Crosswind/desk setup. However, when printed with Inland PLA+, with 75% infill - there was still too much flex in them. I added horizontal bracing to reduce the flex, and a square…
- Pobrania
- 40
- Polubienia
- 3
- Ocena
- 5
P
PrintablesRCHeliGuy
Crosswind mount for Simlab P1(X)
This is a 3D printed mount for the Crosswind pedals that fits inside the frame of a SimLab P1(X) chassis. It can be submerged pretty deeply into the frame. I also remix some Pedal bars for the Crosswind pedals that have 10mm of clearance…
- Pobrania
- 34
- Polubienia
- 9
- Ocena
- 0
P
PrintablesHanSolo100
MFG Crosswind Wall Spacer
A simple wall spacer for the MFG Crosswind pedals I created for my uneven wall. The two parts were a pretty good press fit, but you may need to modify them according to your printers tolerances. I printed it in some PLA-CF I had left over…
- Pobrania
- 26
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBanditFPVprints
Mini Crosswind 'Aero' Pan Tilt
Lightweight, tough, excellent performance
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesMr V
MFD Mini Crosswind Motor Mounts
You'll need 8 - m3X4.5X3 heat set inserts. I used some i had out of this assortment . But these will work as well m3X5X3 Print with a high temp material. I used ASA for mine. Its probably overkill but I printed mine with 100% infill. The…
- Pobrania
- 22
- Polubienia
- 0
- Ocena
- 0
P
Printablesv a
Bass shaker mount for MFG Crosswind
Transducer puck mount for mfg crosswind and combat pedals
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
Printablesmstarzec
Pan Servo mount for crosswind mini
Pan Servo mount for crosswind mini
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMr V
Crosswind Mini 1600 Servo Trays for 17G Sized Servos - Updated for better linkage clearance
I had some ProModeler DS100DLHV micro servos laying around and wanted to use them in my Mini Crosswind. The servo trays are slightly bigger than the original so you will need to trim some foam to use them. They're 1mm wider and 5mm longer…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesmstarzec
Walksnail crosswind mini mount
Walksnail crosswind mini mount
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMr V
Crosswind Mini Wing Glueing Braces
the plastic pieces in my kit had a slight bow to them and I wanted to make sure they were glued in properly. This is what I came up with. You'll need 8 m3X5X5 heat set inserts as well as 8 m3X10 screws. You should be able to print…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0