Archetype carriage for Monolith with Gustav Railway clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Carriage with belt clamps for Archetype for Monolith gantry.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 175
- Wydruki
- 1
- Wyświetlenia
- 1196
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Carriage with belt clamps for Archetype for Monolith gantry.
I moved away from Archetype to Gustav Railway in the past because the belts on Archetype kept giving me problem (even with other mods). I wanted to go back to Archetype because of all the hardware support but the belts on Gustav were really good. Hence I decided to create the best of both worlds.
The placeholder for makerbeam is from the official Gustav Railway project, but never worked for me. Its best to just get some makerbeam nuts.
If you want to use your printer for a challenging and rewarding project, check out my indestructible 3D printed RC car project! The best one in the world, just like this carriage ;) I know all the other 3D printed RC cars break, but RUDE is better than store-bought!