Hockey Stick Rack for 10 Sticks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wallmountable stick rack tthat holds 10 hockey sticks
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 136
- Wydruki
- 0
- Wyświetlenia
- 783
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A hockey stick rack to help keep all of your sticks organized and upright instead of dumped in the corner, falling over all of the time.
Can be installed using 2 screws/anchors, command strips, or double sided tape.
Print in mounting orientation for the most strength. A custom variation made for my local rink has had these installed in the locker rooms for over year without any breaking. So even in PLA, they can hold up to some abuse from rowdy travel players.
Depending on your printer bed size, may require you to rotate it 45 degrees to fit corner to corner.
Print Settings:
5 walls
35% cubic infill
Print time is approximately 3.5 hours on something like a Bambu Lab X1/P1/A1, 2 hours on a Sovol SV08, or about 12 hours on a lightly modified Ender 3 V2.