1 / 3
Magnetic Adapter for ANY Sunglasses Clip Car Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple magnetic glasses clip adapter for almost any sunglasses car holder
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 1268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
This model was designed for magnetic glasses clip owners who want to use Sunglasses Car Holder.
Quick tips:
-NO SUPPORTS is required
-After printing the model, place each magnet into the holes at the back side and push them all the way in
You will need:
- 2 x "magnet 6mm" (diameter)
-PETG filament (PLA is bad choice for car equipment)
-any sunglasses car holder (for example: Model used in the photo)