Wall mounted NIGHT TABLE with drawers and shelves+chargers and outlet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's really big. I would recommend to 3d model it to your liking. Every part should fit a 235*235 build plate.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 226
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial
It's really big. You will definitely need more than 1.5 kg of filament. It will fold up if you print it in PLA but try to give it more infill if you can.
The parts fit together without glue, but I would strongly advise to glue it with a 3d pen or with something.
Parts are in one file, but it will not fit on one plate. Every part should fit a 235*235mm build plate.
Chargers are custom for me, so if you want them you will need to do some 3d modeling. And after that all the custom 230 AC wiring. PLEASE ONLY PROFESSIONALS DO THIS STEP. Or just buy some one socket cable extensions.
I don't use the drawer, because I don't really want them. I like to put my books in the middle. Also the phone stand is not included in the file.
I painted mine table black, mainy beause I used my PLA scraps.