1 / 1
Vehicle magnetic mount for N-type antennas — zdjęcie 1

Vehicle magnetic mount for N-type antennas

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a strong antenna mag mount for N-type antennas that uses a right-angle connector and accomodates roof angle.

Ocena
0 / 5
Polubienia
10
Pobrania
63
Wydruki
0
Wyświetlenia
518
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I designed this mount specifically to angle for my car (a 2013 Prius) roof angle. You can adjust the angle in the provided OpenSCAD file to adjust for yours, as well as the footprint of the magnets. You may find you just need to move it further back or forward on your roof to ensure your antenna is pointed vertically.

The photo shows an earlier version, with a slightly taller boss for the right-angle N-type mount.

Do not print this in PLA. It will warp and fail in even a moderately warm day. I printed mine out of Sunlu PETG. Using 3 rubber coated magnets (linked below), this is much, much stronger or as strong as any other mag mount I've used. If you need to move it, try not to pull it straight up, as it could deform the roof of your car. Instead, lever it off if you need to move or remove it. I've driven at freeway speeds with this and it hasn't moved a single bit.

You will need a cable with a right-angle, female bulkhead N-type connector, and a connector on the other end appropriate for your device. Meshtastic devices typically require a male SMA connector (the cable should have the pin), but you should double check as product descriptions can vary.

My feed line is a 1m, custom RG-174 cable from: https://wifiexpert.us/customRFCable.php

If you are using a 22dB meshtastic device this may be an unacceptable amount of loss, but I'm using a 30dB-capable Bandit Nano. 

This is a GPL-licensed file. If you sell these, you must attribute back to this page.

Magnets used: https://www.amazon.com/gp/product/B0CW5ZVMF6

Antenna used: https://store.rokland.com/products/alfa-aoa-915-5acm-5-dbi-omni-outdoor-915mhz-802-11ah-mini-antenna-for-lora-halow-application

Tagi