Silicone Brush Nozzle K1C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Original creality brush replica
- Ocena
- 5 / 5
- Polubienia
- 116
- Pobrania
- 663
- Wydruki
- 1
- Wyświetlenia
- 2698
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
After looking for replacement parts for my K1c brush and not finding them for sale, I decided to look if someone had created one, but they all differ in some way from the original, so I decided to replicate the original myself.
Printed on TPU with 100% infill.
If you have problems with the seams, print on your side with the brushing cells facing you, you do not need support since if you have a good leveling of the first layer and the adhesion of the TPU you will not have problems.
I printed with Sakata flex 920:
Layer height 0.1
2 perimeters
100% infill
aligned seam
30mm/s
the piece oriented as I indicate just above, is the best shape and quality I got, without problems with seams or hairs.