1 / 3
Mercury 3.5hp 4 Stroke fuel tank filler cap and washer — zdjęcie 1
1 / 3

Mercury 3.5hp 4 Stroke fuel tank filler cap and washer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This allows you to refill the fuel tank whilst underway and avoid running out of fuel at the worst possible moment.

Ocena
0 / 5
Polubienia
2
Pobrania
18
Wydruki
0
Wyświetlenia
254
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This rework of the Mercury fuel cap allows you to pump petrol from a distant tank whilst underway. You can't over fill the tank as there is a return line attached to the external tank. A few pumps every so often will prevent that horrible feeling of the motor conking out at the worst possible time.

It also allows you to avoid using a funnel etc with petrol splashing around. 

You will need to buy a fuel hose and fittings and you can also make them detachable as in these photos.

The thread on the cap is set so it lines up to port over the throttle handle/arm as well.

I have included a printable washer you can make out of TPU / Polyflex as well.

Here is a link to a video of it in action …  at the 3 minute mark and again at the end.

 

Tagi