Milwaukee M12 HAMMERVAC Vacuum Nozzle Attachment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Perfect for keeping Desktop Project Spaces clean, enhances vacuum effectiveness when sucking up dust and small debris.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an attachment I designed for the Milwaukee M12 HAMMERVAC to turn it into a portable desk vacuum. I regularly use this attachment on my project workspaces sucking up snipped wire bits, solder splatter, and filament support debris.
This part was designed to be printed in TPU for a soft rubber-like tip but will work in other materials if desired, just account for shrinkage and tight tolerances.
Supports are needed for the locking mechanism, use a small screwdriver and needle nose pliers to remove them if nessicary. Tolerances are 0.1mm so make sure your printer is tuned accordingly.