Blank Slate Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Top mount case for the blank slate keyboard
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 531
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
This is a top mount case for the blank slate keyboard. It just fits on 256x256 build plate and is printable without supports. The plate is only compatible with the 2x2u layout. I've also included a TPU inlay which provides some nice sound dampening at 3 walls and 15% gyroid infill. Top and bottom are held together by magnets which allows for easy access to the power switch / reset button and there's an additional cutout at the bottom for a larger battery.
Additional hardware required:
- 6* M2 heat inserts
- 6* M2 screws (short)
- 8 Magnets (3x3)
Might also be compatible with Planck PCBs but I haven't tested it.