Gondola Shroud v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lightweight fan shroud for SV08, now in a multi-part design for ease of maintenance. Works with some eddy probe mounts.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 321
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
“Gondola” lightweight fan shroud for SV08. Remains under development but releasing this iteration as v3 since it's usable and I could use some input from the community.
Improvements over v2 include:
- Multi-part design for modularity (future designs) and ease of installation/maintenance;
- Airflow optimization, ditched 360 degree in favor of more pressure;
- Compatible with Rappetor's eddy probe mount;
- Likely compatible with Beacon Rev H (the numbers work but will be tested soon)
Stability is a known issue in this design. While I haven't noticed any impact on my actual prints, the result from input shaper shows some wobble in the shroud - likely as a result of going to a multi-part design. This will be addressed in future versions. If you'd like to test this version, I recommend using a stiff material. I use PETG-CF for all my printer modifications and have found that it handles heat just fine, even in an enclosure.
Print with Voron settings. 4 walls 5 top/bottom 25+% gyroid infill. Organic supports.
BOM
4x Heat Set Inserts M3 x 4mm dia x 4-5mm deep
4x M3x10mm to attach face
2x M3x10-12mm to attach fan