1 / 6
Cat Back Scratcher
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cat shaped back Scratcher with ball of yarn grips.
You will need 2 piece of cord 50cm long to tie together. I used 1mm cord but hole is 2.5mm
Design in mind for limited mobility people as it goes over shoulder and down to side, the balls of yarn are also easy held in palms.
*NOTE* Claws may need light sanding depending on the print I had 2 which had some stray filament from nozzle which was a bit too sharp.