Sleek Carabiner (Travel Essential)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a great model of a carabiner and implements all its purposes and works as a print in place model!
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 2
- Wyświetlenia
- 370
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
What makes it special
I clipped this to my everyday backpack the first time I printed it, and it has stayed there since.
It is a print-in-place carabiner, and it prints quickly with an almost no fail rate. I made it to be useful on a bag, not fussy to print, and trying it in different colors is a good way to get the sleek look the name promises.
Safety tip
Do not use this for climbing of any sort. It could break if a large amount of force and weight are applied to it, and I am not liable if that happens.
I recommend a strong filament, though PLA works too, and TPU is worth trying just to see what happens. One thing to watch: the more you use it, the more the tension can be put out of place, and if you keep pushing it out of place, it is more likely to stay that way. That should not be a big deal for everyday bag use.
Print Settings:
Infill: 10%-100% (Depends on what you use it for)
Infill Type: Gyroid
Supports: NO
Brim: NO
Filament: PLA or PETG or ABS/ASA or TPU
Print tip
For a printer that is not fully calibrated, or an older one, open PrusaSlicer, go to Print Settings, then Advanced, then Slicing, and set X/Y Compensation to -0.1 or -0.15. If the walls still melt into each other, try -0.2 or -0.25 at the most.
Good to know
My Patreon page is still available at patreon.com/MasterPrinter, but I do not actively update it anymore.
You may also like:
Functional Cord Organizer (Travel Essential)
Modern Earbud Holder (Travel Essential)
Anti Theft Protection (Zippers) Travel Essential (Print In Place)