OSB 3D Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With these connectors, you can assemble a stand for your 3D printer of any size. Use standard OSB boards or a…
- Ocena
- 0 / 5
- Polubienia
- 134
- Pobrania
- 373
- Wydruki
- 0
- Wyświetlenia
- 2211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
With these connectors, you can assemble a stand for your 3D printer of any size. Use standard OSB boards or a furniture board that can be cut to your size in the store and assembled at home as IKEA furniture.
For example:
- 3 walls 500X1000,
- the bottom and lid 500X500,
2 shelves 515X515 (shelves need to be made 15 mm larger so that they do not hang out) - and 2 narrow inserts 30X1000.
For the four outer corners, you will need 4 sets of Bowl+Bolt+Nut.
For each shelf, you need 4 sets of Nook+Nook Nut+Bolt. Bolts is best printed with 100% infill.
To save plastic, all the parts inside are empty, but very strong.
If you print out the hinges (for example: https://www.thingiverse.com/thing:4783423), you can add a door.You may be interested in another option:
Thank you for every review, like and donation,
It motivates and helps to implement new projects! Print Settings
Rafts:
No
Supports:
No
0,2
Infill:
20
Filament:
PolyMaker PLA
Category: Household