Forstnerbohrer bit 45mm guide 90°
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bosch Forstner Bit with Serrated Edges // Forstner bit 45mm guide for 90° drilling. No support material required
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I needed a guide for a 45mm Forstner bit and the hole should be as perpendicular to the plate as possible. So I designed this guide.
It fits a Bosch 45mm "Forstner Holzbohrer mit Wellenschliff"
Product Number (2608577020)
I think it should also fit 32-50mm because according to the document they all have a 10mm shaft and I assume the shaft is therefore identical on these drills. At the thickest point the shaft is 14mm.
I printed it out in PETG with 4 perimeters and 0.2 layer height. It was designed so that no extra support is needed. The round support in the bit can then simply be broken off. (The red part in the Fusion Screenshot = Support)