Pumpkin Click-it Fidgets for Halloween
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These Click-it Fidgets have a keyboard switch inside that sounds super "clicky" and will satisfy your fidgeting needs!
- Ocena
- 4,6 / 5
- Polubienia
- 886
- Pobrania
- 2933
- Wydruki
- 10
- Wyświetlenia
- 23 057
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Standard Digital File License
Click-it Fidgets are a perfect non-sugary treat to hand out for Halloween! 🎃 I've included a pumpkin base with and without the keychain hole too! This set of Click-its has six jack-o-lantern faces to choose from plus a blank pumpkin.
Simply add a keyboard switch to attach the two halves together and provide an extremely satisfying “click” to your Click-it Fidget! These are the keyboard switches that I have been using. The white version makes a nice loud “clickety clack”! 😉 I like to insert the keyboard switch into the base first, and then I press the jack-o'-lantern face on for easy alignment.
These switches have two metal pins that I fold over before inserting them into the base.
Please leave a comment if you have a different brand of keyboard switches that fit too!
Print Settings:
These are intended for a multi material printer. The black is two layers thick (0.4mm thick assuming a 0.2mm layer height). Since both the base and the cap are printed face down on the build plate I set the number of bottom layers to 6, use Arachne wall generator, and 1 perimeter on the first layer. If you experience trouble with the first layer try slowing the first layer speed down to around 30.
Are you interested in selling your prints of my designs? Join my Printables Club, and start making 💰 with your idle printers!