1 / 3
xTool F1 dual exhaust plate
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces the original exhaust pipe. Lets you use original hose as well as 80mm.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 76
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (20)Powiązane
Hi all,
this is my version of an exhaust adapter for the F1. I wanted to be able to use the original white hose as well as a 80mm one I bought, depending on where I use the laser.
Just unscrew the original pipe and replace it with this one.
Print it with the square part touching the heatbed and use some support. Works great in PETG.