1 / 8
Finger Board LC / Mini print in place skate board. — zdjęcie 1
1 / 8

Finger Board LC / Mini print in place skate board.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Its a 3D printable finger board model ! Print in place without supports and maby a little bit of hair spray or glue.

Ocena
0 / 5
Polubienia
52
Pobrania
861
Wydruki
0
Wyświetlenia
2005
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
GNU General Public License v2.0

 

                                                                         For The Two Boards:

A finger board with diffrent patterns and texts. Print in place on its side with a little bit of hare spray or glue if needed. I will add more files over time and maby even some ramps if I dont get bored first :). I recomend to use 100% infill to have stronger axles conecting the wheels.

                                                          

 

                                                                   V2 Board Inprovements:                                                                                                                                                                                                                                          For V2 I fixed some things and made it more simple. V2 has one type of wheel and one type of board. I shortend the length of the board by a bit, made the wheels thicker and made it so the wheels dont slide back and forth as much. 

                                                                        

 

                                                                              For V1 Board:

Thare are thin board and thick boards. The thin ones are about 20 mins faster to print but thare board is a little week. The thick ones are stronger with five layers for the board Instead of four. (only for V1 boards)

                                                                                            

                                                                         

                                                                        For The Pictures:

Picture 1,2 and 3 are Board V2.

Picture 4 and 5 are Board V1.

Picture 6 and 7 compare them. (V2 has wider wheels and is shorter)

                                                    

                                                             Made in tinkercad

 

 

Updates:

 

Monday, October 14, 2024 

1: Hex Board Thin , Smooth Wheels (V1)

2: Hex Board Thin , Grippy Wheels (V1)

3: Hex Board Thick , Smooth Wheels (V1)

4: Hex Board Thick  , Grippy Wheels (V1) 

5: Blank Board Thin , Grippy Wheels (V1)

6: Blank Board Thin , Smooth Wheels (V1) 

7: Blank  Board Thick  , Grippy Wheels (V1)

8: Blank Board Thick , Smooth Wheels (V1)

 

Tuesday, October 15, 2024 

9: Blank Board (V2)

10: Hex Board (V2)

 

Saterday,October 26, 2024

11:  “Printables”  Text  (V2)

12:  “3D Printed”  Text (V2)

Tagi