Finger Board LC / Mini print in place skate board.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Its a 3D printable finger board model ! Print in place without supports and maby a little bit of hair spray or glue.
- Rating
- 0 / 5
- Likes
- 52
- Downloads
- 855
- Makes
- 0
- Views
- 1,995
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- GNU General Public License v2.0
For The Two Boards:
A finger board with diffrent patterns and texts. Print in place on its side with a little bit of hare spray or glue if needed. I will add more files over time and maby even some ramps if I dont get bored first :). I recomend to use 100% infill to have stronger axles conecting the wheels.
V2 Board Inprovements: For V2 I fixed some things and made it more simple. V2 has one type of wheel and one type of board. I shortend the length of the board by a bit, made the wheels thicker and made it so the wheels dont slide back and forth as much.
For V1 Board:
Thare are thin board and thick boards. The thin ones are about 20 mins faster to print but thare board is a little week. The thick ones are stronger with five layers for the board Instead of four. (only for V1 boards)
For The Pictures:
Picture 1,2 and 3 are Board V2.
Picture 4 and 5 are Board V1.
Picture 6 and 7 compare them. (V2 has wider wheels and is shorter)
Made in tinkercad
Updates:
Monday, October 14, 2024
1: Hex Board Thin , Smooth Wheels (V1)
2: Hex Board Thin , Grippy Wheels (V1)
3: Hex Board Thick , Smooth Wheels (V1)
4: Hex Board Thick , Grippy Wheels (V1)
5: Blank Board Thin , Grippy Wheels (V1)
6: Blank Board Thin , Smooth Wheels (V1)
7: Blank Board Thick , Grippy Wheels (V1)
8: Blank Board Thick , Smooth Wheels (V1)
Tuesday, October 15, 2024
9: Blank Board (V2)
10: Hex Board (V2)
Saterday,October 26, 2024
11: “Printables” Text (V2)
12: “3D Printed” Text (V2)