Qidi Plus 4 Rear Chamber Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simpler printer to cover / seal for the rear slot in the chamber. This blocks airflow from the mainboard chamber.
- Ocena
- 4,929 / 5
- Polubienia
- 180
- Pobrania
- 1607
- Wydruki
- 12
- Wyświetlenia
- 8454
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a simple print that allows you to cover the rear slot in the back of the chamber. This seals the chamber up even more and blocks the air coming from the mainboard chamber. Helpful when you are running the mainboard 80 mm fan mod.
The print just snaps in place. Print with ABS or other higher temp material.
You only need to print the 3MF version, is the correct size. The STEP is just there if you want to customize the length.
This is just the first version, I would like to develope it a bit more so it covers the area around the stepper motor also.