Ford F-150 2008 King Ranch Reverse Sensor/Cigarrete/Charging Socket Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement trim plate for my Ford F-150 backup sensor button and cigarette lighter.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This print cost me 0.48 and saved me about $59.00 which the USED one on eBay was listed for! A used one would be just as brittle as it would just as old as mine (unless it was new old stock which I could not find).
I did make a minor modification in that I removed an unnecessary piece in the middle on the back side. It appears to be some sort of holding socket. I am not sure what option it may be for.
This fit my 2005 F-150 Lariat.
UPDATE
Unfortunately, the PLA did not hold up to the heat. The locking tabs on the back all began to droop which in turn let the plate fall out of the console. It needs to be printed in ABS to stand up to the heat.