Festool D27 Hose clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clips for the Festool d27 hose to secure the Plug-It power cord to the dust collector hose
- Ocena
- 4 / 5
- Polubienia
- 43
- Pobrania
- 333
- Wydruki
- 1
- Wyświetlenia
- 1050
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
There are other clips out there to hold your plug-it power cord onto your festool D27 hose; I tried them and kept having issues with the clips popping off.
These clips have a much narrower opening for the hose to fit into. With PLA or PETG, there is enough flex that you can squeeze the D27 hose into the clips. Also, the plug-it cord recess is also a nice snug fit with a 9mm opening that holds the plug-it cord nice and snug.
I haven't tried these with the newer Festool fabric covered hoses, but they are perfect for the original corrugated style hose. Clips feature a 34mm ID for the hose and are 12.5 wide for a robust part. Tested in both PLA and PETG. Both are perfect. ABS should work too.