Liczymy pasujące modele…
Festool D27/ D36 suction hose holder - simplify your tool management Where do you currently hang in your suction hose? Print your own Festool suction hose holder and make your everyday work easier and more productive. Do you need further…
Just a simple Hose Clip for the D27 Festool hose. Category: DIY
Adapter to connect FESTOOL™ CLEANTEC™ D27 Dust Extractor to DeWalt™ Air-Lock™ tools This adapter is designed to allow a FESTOOL dust collector with a D27 hose fitting to connect easily to DeWalt tools featuring the "AirLock" style dust…
If you have D27 hose with taper then I recommend going with 3 of each size (Small/Medium/Large). For D36 you can just use the same size all the way along it. The wall bracket is for the D27 only. If you would like a wall bracket for the…
I made this adaptor to connect my Festool D27 hose to some cheap Titan shop vac attachments I bought, but it should fit any attachments with an internal diameter of 32 mm. The Festool cleantec end locks into place with retaining tabs…
Standard hose coupler for Festool hose for connection to Festools line of dust extractors e.g. CT SYS, CT MINI, CT MIDI, CLEANTEC CT 26, CLEANTEC CT 36, CLEANTEC CT 36 AC, CLEANTEC CT 48, CT-VA pre-separator. Check out my profile, I have…
This is a cable clip designed for the D27 hose. I'm testing a clip that is lower profile but longer than most of the clips available. It still catches a little more than I would like but is an improvement. I'll post updates as I make…
90 rotating elbow hose coupler for Festool hose for connection to Festools line of dust extractors e.g. CT SYS, CT MINI, CT MIDI, CLEANTEC CT 26, CLEANTEC CT 36, CLEANTEC CT 36 AC, CLEANTEC CT 48, CT-VA pre-separator.. Similar to Festools…
There are other clips out there to hold your plug-it power cord onto your festool D27 hose; I tried them and kept having issues with the clips popping off. These clips have a much narrower opening for the hose to fit into. With PLA or…
Adapter to connect Festool Cleantec accessory (model: D27 DM-AS CT Number: 10019348) to a regular 32mm vacuum hose I had this festol accessory in the house which is for the 27mm vacuum hose that I don't have but I wanted to use it on a…
Adapter für die Oberfräse Makita PJ7000 zu Festool D27 Schlauchanschluss. Ersetzt den vorhandenen Adapter.
Adapter to attach D36 hose to D27 hose. Check out my profile, I have other Festool hose adapters as well. Uses the dimensions of original Festool retainer and snap rings, so these can either be printed or you can use your own if you have…
The Fusion360 file allows you to change the outlet to whatever you want. Simply go to the User Parameters and change the ID, length, and angle for the transition.
Smart Festool D27 Hose / Cable Clip – Easy Release Design This innovative clip is designed to attach an electrical cable to the Festool D27 hose , with one key advantage: you can remove the cable without taking the clip off the hose .…
Festool suction hose reel holder - improve your tool management. Can be used in addition to : https://www.printables.com/fr/model/806346-festool-d27-suction-hose-holder…
PLA is fine for Adapter part. If used to endcap take extra care or it will easy snaps. PETG works great for endcap. Printet with no supports.
A quick & dirty remix of PwnCNC's Ultimate Festool Cleantec Adapter in order to connect my Kreg 720 pocket hole jig to my Festool CT26. This one is specifically sized for the Festool D27 / 27mm hoses. Prints without support. I recommend…
Printed on Prusa Mini with following settings PLA 0,6 mm nozzle 0,25 mm layer hight 40% Gyroid infill supports everywhere.
This monster is an adapter to attach 3 festool D27 hoses to one port. The port has a diameter of 45 mm which will fit the D36 vacuum adapter among others. The three D27 hoses are attached with retainers that have a left handed thread and…
Two Adapters to connect the Festool D27 standard hose to a 50mm pipe system. Included files: D27 Hose to DN50/HT50 DN50/HT50 to CTM Midi Flansch / D27 Flansch Category: Hobby
Festool suction accessory holder - improve your tool management. Can be used in addition to : https://www.printables.com/fr/model/806346-festool-d27-suction-hose-holder Printing parameters Material: PETG (recommendation) Layer Height:…
Adapter für den Excenterschleifer Metabo EXC450 TurboTec zu Festool D27 Schlauchanschluss.
Accessory to catch dust. Tested with Bosch GWS13-50VSP 5 inch angle grinder.
Purpose: This adapter allows to connect a Festool suction hose with inner diameter 27mm to the dust collector of a Fein Multimaster tool. Comment: The adaptor fits very tight on the Fein dust collector. Also the suction hose fits very…
Kryt okolo trubky topení o rozměrech d=60mm, D=27mm, s=5mm. Nutno vytisknout 2 kusy pro složení.
Update: Combination adapter Festool D27 and osVac M40 to Makita Festool D27 DM-AS/CT adapter for Makita top and edge router RT001G, DRT50, RT0700C, RT0702C, RP0900, M3601, MT361 I modeled the adapter myself and tested it until it fits…
I got sick and tired of fighting with my Festool dust extractor hose when using my Porter Cable biscuit joiner. I finally decided to design a locking hose adapter. The connection between the adapter to the biscuit joiner is still a…
This adapter is for the Festool Cleantec D27 dust collector hose to the Dewalt DCS571 Atomic Circular saw. Pretty straightforward, I tried to keep it compact and close to the original. I'll post adjustments if I make any. Fusion 360 file…
Got tired of trying to keep the hose off the floor and at hand when I'm working on a project. This lets me keep the hose handy as long as there is a horizontal surface to which I can attach the clamp. The clamp mount versions fit the…
Remix of this model on Printables.com: https://www.printables.com/de/model/95300-festool-d27-hose-clip I remodeled it and widened the diameter for the power cord about 1mm. The standard Festool power cords are not such thick, but I have…
Vacuum cleaner combination adapter 2-in-1 osVac M40 and Festool D27 to make yourself. Fusion 360 file to model your own adapter. Because of the grip surface you can easily remove the adapter
Simple adapter allowing a D27 FESTOOL hose to connect to DW 32mm taper fittings such as the plunge router base. Maybe.
STL & STEP models provided for your slicer. If you need to change the taper dimensions, the source F3D file is attached as well.
Suitable for Makita jigsaws BJV140, BJV180, DJV140, DJV180, 4340, 4341, 4350 and 4351 with dustnozzle 417853-4. I printed it in PETG I modeled the adapter myself and tested it until it fits perfectly!!! OsVac M40 and Festool D27…
2.5U 19 inch rack front panel mount for Ugreen Nexode CD271 200W USB Charger These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount / cover…
Got a Mac Mini M4 and a BenQ 27 inch 5k monitor (PD2730S)? Then this is the mount for you :) Attaches the Mac Mini M4 to the back of the monitor to hide the Mac and its cables away, for a clean desktop experience. Printing instructions:…
This is a merge of the two models. It twist locks onto the hose end and allows secure cam lock connections
Adaptor to attach a common vacuum hose to a Festool RTS400 sander with D27 outlet.
all D and F series parts are Compatible
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Summary: A 3D-printable dust adapter connecting the Kreg Edge 20V Ionic Drive Loose Tenon Joiner to a Festool D27 or D27/32 hose with its factory tool-end cuff installed. Designed around a measured Kreg dust port of 36.9 mm outside…
Minimalistic seatpost mount for the Garmin Varia light. Best printed with ASA for outdoor use.
An Adapter to be able to plug the D27/D36 bayonet fitting into any machine that needs the full size 57/52mm hose plug, like f.i. the Festool TKS 80. It should probably also work on any other 52mm plug/fitting. Having to unplug the hose…
Minimalistic and easy to print hose connector for D27/32mm hoses like Festool and Bosch. The design is as narrow as possible, this avoids collisions with the work piece, especially for use with sanders. The slip ring function is similar…
Hose adapter from the sander HILTI WFE 150 to Festool hose Cleantec (D27)
An adapter to connect the Festool dust extractor to the MACallister belt sander
Nozzles for delicate dusting and/or smd work.
my avatar I will make more in the future and it might look a little weird, but it is just a Roblox Caracter
This is the non-USB model
ein hoher und ein niedriger Hängekorb für die Engel MD27F. Sie haben überall 4mm Wandstärke. Sie liegen auf dem Gitterkorb-Einsatz auf. ich hab es in PA auf dem Core One L gedruckt mit 15% Infill und Stützen für die Auflagen. Sind meine…
Wanted to hang my mac Mini behidnd Benq monitor. Since I did not find sutable design, I draw my own. It is not perfect fit regardig the curve, but good enough for me. Holes are VESA 100 aligned. I used two metal inserts with threads.
The Voxicon D27QP monitor had an unused clip-in stand slot. I used it to make a holder for my headphones. For horisontal screens, there are 3 options, depenting on how much space yu have below the monitor. For vertical screen, there is…
