Milling Vise Speed Handle For Kurt 3/4" Hex or Bridgeport 3/4" sq Drive
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Speed handle for machinists' milling vise to open and close jaws more quickly than with large clunky u-joint handle
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
A simple speed handle to make opening and closing milling vise jaws a little less annoying. I made it originally for my old Bridgeport vise with ¾" square drive, but realize the ¾" hex is probably used more or at least as much so I've added models with ¾" hex. I have also made both options either with or without 3/8"-16 threads in the holes on either side for handles. I used regular ol' SHCSs and that works fine for how often I use it but I like the idea of using shoulder bolts with a sleeve that can rotate or gluing in a similar setup made of aluminum or steel. I don't think a printed bolt would hold up to the side to side forces long term. The unthreaded holes are cut to 5/16" which is the tap drill size for 3/8-16 so if you want to print it fast with thick layers and high wall count and tap it yourself you can. Rounded detents on either side of the holes for ergonomic fit that lends itself well to spinning in either direction. Unfortunately I cant find any photos of it in use but its been tested and functions as it should. Hope you find it useful!
I could not find the original one I made to take a photo of, but the 2 in the picture are printed in PC(polycarbonate) on Anker M5 using a cardboard box enclosure a 25mm brim inside and out very slow printing and travel (100mm/s or less) 260 nozzle 60 bed with pretty damn good results. Can share complete profile if anybody wants it. The first one I made and used until I lost it was made with PLA and had no issues at all so make it out of whatever is available or whatever you feel like using.